Bomco F1600 Triplex Mud Pump Liner, API-7K Certified Factory,
Chromium content 26-28%, HRC hardness greater than 60
Material: Liner material ZG45 steel, high chromium cast iron liner.
HRC 60-65 of the cylinder liner;
Production Process: I bimetallic cylinder liner wear hot forging
combines the advantages of the liner and the inner liner high
chromium corrosion. The outer liner is made of carbon steel by hot
pressing. The tensile strength of more than 900000psi. Lining of a
high chromium alloy is made by centrifugal casting.
Application: double metal cylinder is the most widely used, the
largest amount of mud pump fluid end fittings.
High-quality mud pump parts, different sizes of liners, ceramic
Mud pump lining
Mud pump liner comprising a liner and a bimetal ceramic lining.
Size of the liner 6 1/2 ", 7", 140mm, 150mm, 160mm, 170mm, 200mm
Double metal bush combine the wear resistance and the strength of
the forged steel of high chromium housing sleeve and corrosion
resistance. The liner has a high-chromium centrifugal casting
sleeve, which sleeve is machined and heat treated to a minimum
uniform bore hardness 59-65HRC. Double metal bush is a major
consumable component mud pumps, which may be secured together
Coat fine carbon steel, forged, the outer centrifugal casting
technology, high-carbon high-chromium cast, after treatment
hardness of up to 59-67HRC.
Jacket liner: 45 # forged steel, tensile strength δb≥610Mpa,
Yield strength δs≥450Mpa, elongation E≥17%, hardness HRC180-200
Liner lining: high chromium cast iron (centrifugal forging).
Annealed hardness HRC≤40 quenching hardness HRC59-67
Chemical composition C 2.8% -3.1% Cr 26% -28% Si 0.6% -0.9% Mn 0.5%
-1% Mo 0.5% -0.8% S.P≤0.05%
Binding strength ceramic framework and a ceramic lining forged
steel casing wear and corrosion resistance. Ceramic cylindrical
sleeve is to use the national patent zirconia toughened alumina
ceramic obtained, characteristics of zirconia-alumina having a high
fracture toughness and high hardness, a combination that can
improve the fatigue strength of the product. 45 which uses steel
forgings coating having good mechanical properties. After the heat
treatment, hardness HB235-265, tensile strength of not less than
Mud Pump Parts Model We Can Do
Yinda Petroleum Mud Pump Accessories Cylinder Liner Product
Shipping Package Drawing, as follows:
1) How do I place an order?
A: You can contact us by e-mail to see your order details, you can
also order online.
2) How do I pay?
A: After you confirm our PI, we will ask you to pay. EFT is our
most common way.
3) What ordered the procedure?
A: First, we discuss the details of the order, the production
details. Then, we send PI to you for your confirmation. Before we
go into production, you will be asked to pay a deposit or full
payment. After receiving the deposit, we start processing orders.
If we do not have stock, we usually need 15-25 days. Before
production is completed, we will contact you for shipping details
and the balance of payments. After the payment clears, we begin to
prepare for your shipment.
4) How do you take care when your clients received defective
A: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
More customer view:10-TSCmudpumpparts6-yindapump.com.pdf