Mud Pump 7# Full Open Valve Assembly AH0000020100 AH33001-05.17A.00
AH0000020300 GH3161-0511-00 AH36001-05.12A.00
The valve assembly is the key component of the hydraulic end of the
mud pump.
The valve body and the valve seat of the valve assembly are
carburized and quenched with high-quality bonded steel 20
Customer-relationship Management NTI,
According to the inner hole form of the valve seat, the valve
assembly can be divided into a through hole valve, a three-rib
valve and a four-rib valve.
the surface hardness is greater than HRC60, and the conical surface
is ground to ensure high roughness requirements and geometric
dimensions.
The valve assembly consists of valve body, valve rubber, valve nut,
guide frame, gland, clamp spring, steel ball, etc. (i.e. valve
assembly with valve seat removed).
YINDA can provide the following part number of the product:
AH36001-05.12A.00
AH36001-05.12.00
AH0000020400
AH35001-05.14.00
AH0000020600
AH0000020500
RGF1000-05.17.00
RS11309.05.10.00
Mud Pump Parts Model We Can Do
|
| BOMCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | F-1600HL | F-1600L | F-2200HL |
| Hong Hua | HHF-500 | HHF-800 | HHF-1300 | HHF-1600 | 3NB-1600F | 5NB-1600 | 5NB-2400 | |
| HRSB | RSF-1300 | RSF-1600 | | | | | | |
| RG | RGF-800 | RGF-1000 | RGF-1300 | RGF-1600 | | | | |
| Lanzhou | 3NB1000C | 3NB1300C | 3NB1600F | 3NB1600L | | | | |
| EMSCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | FD-1000 | FC-2200 | FB-1300 |
| Gardner Denver | PAH | P7 | P8/9 | P10/11 | | | | |
| National | 7-P-50 | 8-P-80 | 9-P-100 | 10-P-130 | 12-P-160 | 14-P-200 | 14-P-220 | |
| Oilwell | A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT | | | | |
| TSC | WF-500 | WF-800 | WF-1000 | WF-1300 | WF-1600 | WF-2000 | WF-2200 | |
| IDECO | T-500 | T-800 | T-1000 | T-1300 | T-1600 | | | |
| RUSSIA | UNBT-1180L | UNBT-950A | UNB-600 | | | | | |
FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place
order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the
most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details. Then we
issue you an PI for your confirmation. You will be requested to do
pr-e paid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. We usually
need 15-25 days if we don't have the items in stock. Before
production has been finished, we will contact you for shipment
details, and the balance payment. After payment has been settled,
we start to prepare the shipment for you.
4) How do you take care when your clients received defective
products?
A: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
More customer view:90-SOUTHWEST
A-1400 PUMP-yindapump.com.pdf
